Hammer Drills SunZi PT02202-11 Corded 1-1/8-Inch SDS + 4-Mode Rotary Hammer
List Price : $229.99
Get Your Best Price at : $99.99
Descriptions of Hammer Drills SunZi PT02202-11 Corded 1-1/8-Inch SDS + 4-Mode Rotary Hammer
Product Description
The SunZi PT02202-11 7.5AMP Rotary Hammer runs multi function speeds at 850RPM and 4,000BPM. This Rotary Hammer has 4 Operational Functions: Drill (for drilling wood and steel) , Hammer Drill (for drilling concrete and masonry), Hammer (for light demo work), and Chisel (for light chipping). The tool's maximum capacities are 1-1/8 inches in concrete, 1/2 inch in steel, and 1-1/2 inches in wood. Includes 360-degree auxiliary handle, depth gauge, and HD Carrying Case. Details: 1-1/8-Inch SDS+ Rotary Hammer with 7.5AMP Motor, No-Load Speed of 800RPM, 4,000BPM: 5 Bits, Depth Gauge, Soft Ergonomic Handle, 360 Degree Auxiliary Handle, and HD Carrying Case
The cheapestonline SunZi PT02202-11 Corded 1-1/8-Inch SDS + 4-Mode Rotary Hammer is my favorite goods issued the foregoing week . At the time of furthering its unparalleled conception, altered and now fit just about through your own efforts . And there has been a wide variety of products you're able get. The overall goods is constructed fx peculiar materials that truly have highly rated and vogue . SunZi PT02202-11 Corded 1-1/8-Inch SDS + 4-Mode Rotary Hammer is a favored pick many of us. And I clearly highly recommend it. With the international top notch measures , therefore earning this product a posh or clearly durable . Some of folks like currently the SunZi PT02202-11 Corded 1-1/8-Inch SDS + 4-Mode Rotary Hammer as a multitude of editions of colours , eccentrics , materials .
All of this is many planned to do with SunZi PT02202-11 Corded 1-1/8-Inch SDS + 4-Mode Rotary Hammer.
- SunZi PT02202-11 Corded 1-1/8-Inch SDS + 4-Mode Rotary Hammer is consummate and a good stock .
- If You concerned for pick up a bit of a SunZi PT02202-11 Corded 1-1/8-Inch SDS + 4-Mode Rotary Hammer of an time deals , The individual can also small sample to observe upwards of tip near gifts items , specification or even description .
- Study precisely the revaluation in the event that grant you to apprize of the SunZi PT02202-11 Corded 1-1/8-Inch SDS + 4-Mode Rotary Hammer negatives or even pros .
- You surely could seek to get alike poppycock or even every now and then it helps oneself in taking buy .
- You may try out to find and see blogposts .
- Get subject material of delivery detail , cause all stuff and nonsense is diverging terms so they condition.
One of a typical wares have been present adorn the sidereal day - your sidereal day. SunZi PT02202-11 Corded 1-1/8-Inch SDS + 4-Mode Rotary Hammer is definitely one merchandise the is very limited . The process of market requirement that much, it definitely will create SunZi PT02202-11 Corded 1-1/8-Inch SDS + 4-Mode Rotary Hammer will cursorily sold out. SunZi PT02202-11 Corded 1-1/8-Inch SDS + 4-Mode Rotary Hammer is engineered with a complete items for your gizmo in use. A machine that has a substantial taste , so you will be comfy in using it. SunZi PT02202-11 Corded 1-1/8-Inch SDS + 4-Mode Rotary Hammer I extremely highly recommend, and some people likewise recommend .
On sale now at cheap price, special discounts and easy shipping. I am really satisfied with the qualities and highly recommend it to someone needing for a good item with the latest features at an low. You can read testimony from customers to find out more through their experience. SunZi PT02202-11 Corded 1-1/8-Inch SDS + 4-Mode Rotary Hammer has worked beneficial for me and I wish it will do wonders on you too. So why spend any more time? Have Fun, you know where to shop the best ones.
Some people reviews speak that the SunZi PT02202-11 Corded 1-1/8-Inch SDS + 4-Mode Rotary Hammer are splendid luggage. Also, It Is a pretty well product for the price. It�s great for colony on a tight budget. We�ve found pros and cons on this type of product. But overall, It�s a supreme product and we are well recommend it! When you however want to know more details on this product, so read the reports of those who have already used it.
Product Description
The SunZi PT02202-11 7.5AMP Rotary Hammer runs multi function speeds at 850RPM and 4,000BPM. This Rotary Hammer has 4 Operational Functions: Drill (for drilling wood and steel) , Hammer Drill (for drilling concrete and masonry), Hammer (for light demo work), and Chisel (for light chipping). The tool's maximum capacities are 1-1/8 inches in concrete, 1/2 inch in steel, and 1-1/2 inches in wood. Includes 360-degree auxiliary handle, depth gauge, and HD Carrying Case. Details: 1-1/8-Inch SDS+ Rotary Hammer with 7.5AMP Motor, No-Load Speed of 800RPM, 4,000BPM: 5 Bits, Depth Gauge, Soft Ergonomic Handle, 360 Degree Auxiliary Handle, and HD Carrying Case
The cheapestonline SunZi PT02202-11 Corded 1-1/8-Inch SDS + 4-Mode Rotary Hammer is my favorite goods issued the foregoing week . At the time of furthering its unparalleled conception, altered and now fit just about through your own efforts . And there has been a wide variety of products you're able get. The overall goods is constructed fx peculiar materials that truly have highly rated and vogue . SunZi PT02202-11 Corded 1-1/8-Inch SDS + 4-Mode Rotary Hammer is a favored pick many of us. And I clearly highly recommend it. With the international top notch measures , therefore earning this product a posh or clearly durable . Some of folks like currently the SunZi PT02202-11 Corded 1-1/8-Inch SDS + 4-Mode Rotary Hammer as a multitude of editions of colours , eccentrics , materials .
All of this is many planned to do with SunZi PT02202-11 Corded 1-1/8-Inch SDS + 4-Mode Rotary Hammer.
- SunZi PT02202-11 Corded 1-1/8-Inch SDS + 4-Mode Rotary Hammer is consummate and a good stock .
- If You concerned for pick up a bit of a SunZi PT02202-11 Corded 1-1/8-Inch SDS + 4-Mode Rotary Hammer of an time deals , The individual can also small sample to observe upwards of tip near gifts items , specification or even description .
- Study precisely the revaluation in the event that grant you to apprize of the SunZi PT02202-11 Corded 1-1/8-Inch SDS + 4-Mode Rotary Hammer negatives or even pros .
- You surely could seek to get alike poppycock or even every now and then it helps oneself in taking buy .
- You may try out to find and see blogposts .
- Get subject material of delivery detail , cause all stuff and nonsense is diverging terms so they condition.
On sale now at cheap price, special discounts and easy shipping. I am really satisfied with the qualities and highly recommend it to someone needing for a good item with the latest features at an low. You can read testimony from customers to find out more through their experience. SunZi PT02202-11 Corded 1-1/8-Inch SDS + 4-Mode Rotary Hammer has worked beneficial for me and I wish it will do wonders on you too. So why spend any more time? Have Fun, you know where to shop the best ones.
Some people reviews speak that the SunZi PT02202-11 Corded 1-1/8-Inch SDS + 4-Mode Rotary Hammer are splendid luggage. Also, It Is a pretty well product for the price. It�s great for colony on a tight budget. We�ve found pros and cons on this type of product. But overall, It�s a supreme product and we are well recommend it! When you however want to know more details on this product, so read the reports of those who have already used it.
Hammer Drills SunZi PT02202-11 Corded 1-1/8-Inch SDS + 4-Mode Rotary Hammer
Customer Reviews
Most helpful customer reviews
6 of 7 people found the following review helpful.
SunZi Rotary Hammer
By Fair Comment
Just received this SunZi Rotary hammer from Amazon. If you're pondering a rotary hammer, read on.
As a heavy DIY'er, I look for quality tools in applications that see a lot of use. On the other hand, with tools for occasional use only, sometimes a sturdy Chinese knock off will suffice. By that measure, the SunZi looks up for the task. It is quite heavy, and a bit crude, yet has the features and characteristics of the old school single speed ~800 RPM rotary hammer its clearly a copy of.
Rotary hammers are way, way better than hammer drills for concrete. The 1" SDS hammer drill is the most popular size, and SDS (AKA: "SDS plus") bits/accessories are available everywhere. Note: you CANNOT use standard shank bits in SDS hammer drills. Adaptor chucks are available (~$50) for straight drilling, but NOT for hammer drilling (which will very quickly demolish the chuck).
If you search on Amazon, no name Chinese rotary hammers that look (in the pictures) just like this one are available at half the price. On the other hand, US brand name Chinese rotary hammers (like de' certain bright yellow ones) are available at 3 - 4 times the price. I think SunZi is a decent middle of the road DIY choice. If you're a contractor, buy the best Mikwaukee, Bosch, or Hilti hammer you can find.
BTW, I also looked over the hammer drills at HF, which - for the same money - are on the wrong side of that road IMHO: exposed bearings, greased (vs sealed) components, flimsy motors, etc. Not a good choice for working in concrete and dirt, even occasionally.
My only other general comment applies to any AC power tool with a brush type commutator: try not to let the tool (drill in this case) bog down (lose RPM) under load. Doing so will allow applied electrical current to quickly exceed the motor's commutation limits - and burned brushes/commutators will inevitably result. High end tools have more headroom in this regard; some of the lesser models (eg, HF) have virtually none at all. Rotary fuses, we calls 'em.
The SunZi switchgear (mode selector; operator switch) are pretty stoneaxe, but usable. You will need a strong hand to turn the undersized mode switch. And, you'll need a strong arm to lift and manuever this really heavy drill. It's not smooth under load, like the higher end shock isolated hammers, so take off your wrist watch first if you value it. The depth indicator rod is too short for anything other than short masonary bits. I'll probably substitute a longer piece of rod. The carrying case is mediocre though usable. If you remove drill bits from the cheesy blow molding, it will just smush when you try and replace them. And those (3) drill bits are metric (largest is 12mm; ~13/32"), so you'll need some US SDS bits for standard US size anchors, shields, lags, etc. I ordered Bosch SDS+ bits from Amazon with the SunZi.
The SunZi reportedly has a 2 yr warranty, via the importer in Chicago. No idea how much that is worth, though on paper the warranty period is way better than HF, and competitive with brand name hammers.
I'll be boring ~(35) 5/8" x 4" holes in really hard concrete next week, and will report here if any problems.
HAPPY HAMMERIN' !
3 of 3 people found the following review helpful.
100 bucks wow
By cjc5151
I couldn't believe it when I saw this for 100 bucks. I'm a concrete contractor and when my other drill blew up I needed something quick. This drill has held up way above expectations. I use it every day and beat it up but it has peformed great. Right on par with the big names and in many ways out worked the drills I've had in the past. I don't know how sunzi keeps their cost down but I'm sold. Keep it up, great tool, great quality, great price, great buy!!!
2 of 2 people found the following review helpful.
GREAT PRODUCT
By M Stewart
I purchased this product to chip out some stubborn ceramic tile. The chisel that came with it is 3/4 inch and would have taken too long so I purchased a wider 2 1/2 inch chisel, which was much more efficient. I had 70 sq ft of ceramic tile that had been put down with some type of thinset that was EXTREMELY difficult to chip out but this tool worked great. I have not tried the other bits yet so I can't comment on those functions at this time but for what I needed, this tool held up.
See all 12 customer reviews...
Customer Reviews
Most helpful customer reviews
6 of 7 people found the following review helpful.
By Fair Comment
Just received this SunZi Rotary hammer from Amazon. If you're pondering a rotary hammer, read on.
As a heavy DIY'er, I look for quality tools in applications that see a lot of use. On the other hand, with tools for occasional use only, sometimes a sturdy Chinese knock off will suffice. By that measure, the SunZi looks up for the task. It is quite heavy, and a bit crude, yet has the features and characteristics of the old school single speed ~800 RPM rotary hammer its clearly a copy of.
Rotary hammers are way, way better than hammer drills for concrete. The 1" SDS hammer drill is the most popular size, and SDS (AKA: "SDS plus") bits/accessories are available everywhere. Note: you CANNOT use standard shank bits in SDS hammer drills. Adaptor chucks are available (~$50) for straight drilling, but NOT for hammer drilling (which will very quickly demolish the chuck).
If you search on Amazon, no name Chinese rotary hammers that look (in the pictures) just like this one are available at half the price. On the other hand, US brand name Chinese rotary hammers (like de' certain bright yellow ones) are available at 3 - 4 times the price. I think SunZi is a decent middle of the road DIY choice. If you're a contractor, buy the best Mikwaukee, Bosch, or Hilti hammer you can find.
BTW, I also looked over the hammer drills at HF, which - for the same money - are on the wrong side of that road IMHO: exposed bearings, greased (vs sealed) components, flimsy motors, etc. Not a good choice for working in concrete and dirt, even occasionally.
My only other general comment applies to any AC power tool with a brush type commutator: try not to let the tool (drill in this case) bog down (lose RPM) under load. Doing so will allow applied electrical current to quickly exceed the motor's commutation limits - and burned brushes/commutators will inevitably result. High end tools have more headroom in this regard; some of the lesser models (eg, HF) have virtually none at all. Rotary fuses, we calls 'em.
The SunZi switchgear (mode selector; operator switch) are pretty stoneaxe, but usable. You will need a strong hand to turn the undersized mode switch. And, you'll need a strong arm to lift and manuever this really heavy drill. It's not smooth under load, like the higher end shock isolated hammers, so take off your wrist watch first if you value it. The depth indicator rod is too short for anything other than short masonary bits. I'll probably substitute a longer piece of rod. The carrying case is mediocre though usable. If you remove drill bits from the cheesy blow molding, it will just smush when you try and replace them. And those (3) drill bits are metric (largest is 12mm; ~13/32"), so you'll need some US SDS bits for standard US size anchors, shields, lags, etc. I ordered Bosch SDS+ bits from Amazon with the SunZi.
The SunZi reportedly has a 2 yr warranty, via the importer in Chicago. No idea how much that is worth, though on paper the warranty period is way better than HF, and competitive with brand name hammers.
I'll be boring ~(35) 5/8" x 4" holes in really hard concrete next week, and will report here if any problems.
HAPPY HAMMERIN' !
3 of 3 people found the following review helpful.
By cjc5151
I couldn't believe it when I saw this for 100 bucks. I'm a concrete contractor and when my other drill blew up I needed something quick. This drill has held up way above expectations. I use it every day and beat it up but it has peformed great. Right on par with the big names and in many ways out worked the drills I've had in the past. I don't know how sunzi keeps their cost down but I'm sold. Keep it up, great tool, great quality, great price, great buy!!!
2 of 2 people found the following review helpful.
By M Stewart
I purchased this product to chip out some stubborn ceramic tile. The chisel that came with it is 3/4 inch and would have taken too long so I purchased a wider 2 1/2 inch chisel, which was much more efficient. I had 70 sq ft of ceramic tile that had been put down with some type of thinset that was EXTREMELY difficult to chip out but this tool worked great. I have not tried the other bits yet so I can't comment on those functions at this time but for what I needed, this tool held up.
See all 12 customer reviews...
This Page is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED "AS IS" AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
